A long range full HD image transmission system with remote control, telemetry, and built-in OSD.
What frequency bands do HM30 use?
5100 to 5825 MHz, centering at 5550 MHz.
Can I replace the antennas on HM30?
Yes, of course.
Both the ground unit and the air unit are using SMA connectors for antenna installation.
SIYI original antennas are:
4 x Omni Antennas (2 for ground, 2 for air)
2 x Directional Antennas (for ground)
SIYI optional antenna choices are:
- Air Unit Lollipop Antenna
- Ground Unit 17 dB High Gain Antenna
- Ground Unit 21 dB High Gain Antenna
- Ground Unit 26 dB High Gain Antenna
How much transmitting power in HM30?
Around 25 dBm / 320 mW
What is the effective range?
The latest record is 50 km.
With different antenna setup and in different wireless mode, the range limit is different.
26 KM Range Test Full Video - SIYI HM30 Full HD Image Transmission System
Amazing Record 42 KM Range Test Full Video - SIYI HM30
What flight controllers are compatible with HM30?
To use the OSD overlay, the flight controllers should support Mavlink output, such as Ardupilot, PX4, INAV, etc.
If the OSD overlay is not necessary, then any flight controllers are compatible with HM30.
What remote controllers are compatible with HM30?
Any remote controllers which support S.Bus output, or their receivers supports S.Bus output.
What interfaces to output video stream on HM30 ground unit?
- USB-C
- LAN (UDP telemetry simultaneously)
- Internal WiFi (UDP telemetry simultaneously)
- USB WiFi (UDP telemetry simultaneously)
Does HM30 ground unit support HDMI output?
Yes with a sold-alone Ground Unit LAN-HDMI Output Converter Module.
Does HM30 air unit support HDMI input?
Yes with a sold-alone Air Unit HDMI-Ethernet Input Converter Module.
What are the dimensions and the weight of the HM30 unit and the FPV camera?
Air Unit
- Dimension: 70x55x24 mm (antenna detached, fan height included)
- Weight: 74 g (antenna detached)
FPV Camera
- Dimension: 42x42x25 mm
- Weight: 23 g
What kind of models are the most suitable for HM30?
