Logo

New Product! SIYI UniFC 6 PICO Autopilot, Pico in Size, Universe the Flight. Support Ardupilot / PX4

2026.09.10

On September 10, 2026, SIYI Technology officially released the UniFC 6 PICO mini flight controller. Compatible with mainstream open-source protocols including Ardupilot and PX4, the product is designed for open-source ecosystem airframe integration, offering a smaller, lighter flight controller option that balances redundancy and expandability.

The flight controller is the central control hub of an airframe, directly determining the stability and smoothness of UAV flight and serving as the first line of defense against crashes. To ensure safety, flight controllers typically incorporate multiple redundant sensors, so that if some sensors fail, the redundant units can continue operating normally, reducing the risk of a crash. For this reason, many industrial-grade flight controllers are relatively large. The UniFC 6 PICO was introduced precisely to strike a new balance between redundancy, performance, and size.

Pico in Size, Universe the Flight: One Core, Everything you Need.

The UniFC 6 PICO is a micro industrial-grade control system developed by the SIYI team. Weighing only about 40g, its highly integrated design allows it to fit easily into space-constrained platforms such as FPV aircraft and micro multirotors. The product is deeply integrated with Ardupilot / PX4 open-source firmware and supports multirotor, fixed-wing, unmanned ground vehicle (UGV), and unmanned surface vessel (USV) applications, among others. It is powered by an STM32H7 high-performance processor running at 480MHz and features dual IMU + dual barometer redundancy with IMU temperature compensation. The product offers a rich set of interfaces, supports 100M Ethernet communication, and is deeply integrated with SIYI's "gimbal-link & controller-flight controller-propulsion system-software" product matrix, ready for use out of the box, delivering a smoother unmanned system integration experience for tech enthusiasts and airframe manufacturers.

Pico in Size, Fits Anywhere

As a micro industrial-grade control system built around being "compact and lightweight," the UniFC 6 PICO measures just 49×42.6×16.2mm and weighs only about 40g per unit. Compared with the previous generation, it is approximately 44% smaller in volume and 30% lighter in weight. It can easily accommodate a wide range of platforms, including multi-rotor VTOL fixed-wing aircraft, small multirotors, helicopters, UGVs, and USVs.

Equipped with H7 High-Performance Processor

Despite the significant reduction in size and weight, the UniFC 6 PICO is equipped with an STM32H7 processor, paired with 2M flash and 1M RAM, delivering powerful data computing and processing capabilities and leaving broader room for future development. It also upgrades to ICM45686 + BMI088 dual IMU redundancy, offering a larger measurement range and greater noise immunity, making it suitable for aggressive flight scenarios with small aircraft.

Dual IMU & Barometer Redundancy

Redundancy is the lifeline of an industrial-grade flight controller. The UniFC 6 PICO pushes size to the limit while maintaining redundancy. Its compact 40g body integrates dual IMU + dual barometer redundancy with failover support, ensuring system accuracy and stability. If any sensor experiences a temporary failure, the redundant sensor ensures the system continues to operate stably, effectively reducing the risk of a crash. At the same time, compared with products in the same class, its sensors offer a larger measurement range and greater noise immunity.

Low external temperatures can also affect the precision of sensor data output. On top of dual IMU redundancy, the UniFC 6 PICO features a built-in IMU temperature compensation system. Through algorithm optimization, it can adjust flexibly according to the external ambient temperature, heating the IMU to keep it at a constant temperature (default 45°C), effectively reducing sensor "temperature drift."

Supports 3.3V / 5V PWM Output Switching

To accommodate the different requirements of multirotor and VTOL platforms, the UniFC 6 PICO supports flexible switching between 3.3V and 5V PWM output, selectable as needed. For example, in multirotor integration, 3.3V PWM can be selected, while in fixed-wing/VTOL integration, switching to 5V PWM helps reduce signal attenuation caused by line loss and interference.

Rich Interface Expansion

Interfaces are one of the key prerequisites for flight controller selection. The UniFC 6 PICO integrates a diverse and rich set of interfaces to ensure compatibility with most mainstream use scenarios, including: 5× UART, 3× I2C, 2× CAN, 14× PWM output, 1× RC IN (SBUS/PPM), 1× PM power module input, 1× USB port (Type-C), 1× TF card slot, and 1× Ethernet port.

100M Ethernet Interface, Extensive Expandability

In addition to standard functional interfaces, the UniFC 6 PICO features an additional 100M Ethernet port, supporting connections to multi-function mission gimbals, onboard computers, and other extensive expansions, enabling advanced capabilities such as unmanned system swarming, AI tracking and recognition, mapping, and others.

Multi-Model Compatibility, More Than Just UAVs

Deeply integrated with Ardupilot and PX4 open-source firmware, the UniFC 6 PICO supports multiple model options, including but not limited to multirotor / fixed-wing / VTOL / FPV model aircraft / helicopter / UGV / USV, among others. With comprehensive functionality and rich expandability, it enables the construction of diversified unmanned systems.

Complete Flight Controller Kit, Factory-Direct Product-Level Solution

The UniFC 6 PICO supports a series of SIYI flight controller ecosystem products, covering a variety of GNSS modules, RTK positioning and heading modules, Hall-effect power modules, airspeed sensors, and more. Complete flight controller kit, ready to use out of the box. All products simultaneously support the Ardupilot / PX4 open-source ecosystem, shipped directly from the manufacturer, available through one-stop purchasing, significantly lowering the barrier to use.

Meet SIYI Ecosystem Expansion

Gimbal Camera - Link & Controller - Autopilot - Propulsion System - Software, Five-in-one integration. UniFC 6 PICO is deeply integrated into the SIYI ecosystem, enabling quickly connect to various components, greatly reducing adaptation costs. Paired with UniGCS software, one-stop parameter tuning and control. More expansion possibilities, beyond traditional open-source ecosystem!

New Product! SIYI UniFC 6 PICO Autopilot, Pico in Size, Universe the Flight. Support Ardupilot / PX4

2026.09.10

On September 10, 2026, SIYI Technology officially released the UniFC 6 PICO mini flight controller. Compatible with mainstream open-source protocols including Ardupilot and PX4, the product is designed for open-source ecosystem airframe integration, offering a smaller, lighter flight controller option that balances redundancy and expandability.

The flight controller is the central control hub of an airframe, directly determining the stability and smoothness of UAV flight and serving as the first line of defense against crashes. To ensure safety, flight controllers typically incorporate multiple redundant sensors, so that if some sensors fail, the redundant units can continue operating normally, reducing the risk of a crash. For this reason, many industrial-grade flight controllers are relatively large. The UniFC 6 PICO was introduced precisely to strike a new balance between redundancy, performance, and size.

Pico in Size, Universe the Flight: One Core, Everything you Need.

The UniFC 6 PICO is a micro industrial-grade control system developed by the SIYI team. Weighing only about 40g, its highly integrated design allows it to fit easily into space-constrained platforms such as FPV aircraft and micro multirotors. The product is deeply integrated with Ardupilot / PX4 open-source firmware and supports multirotor, fixed-wing, unmanned ground vehicle (UGV), and unmanned surface vessel (USV) applications, among others. It is powered by an STM32H7 high-performance processor running at 480MHz and features dual IMU + dual barometer redundancy with IMU temperature compensation. The product offers a rich set of interfaces, supports 100M Ethernet communication, and is deeply integrated with SIYI's "gimbal-link & controller-flight controller-propulsion system-software" product matrix, ready for use out of the box, delivering a smoother unmanned system integration experience for tech enthusiasts and airframe manufacturers.

Pico in Size, Fits Anywhere

As a micro industrial-grade control system built around being "compact and lightweight," the UniFC 6 PICO measures just 49×42.6×16.2mm and weighs only about 40g per unit. Compared with the previous generation, it is approximately 44% smaller in volume and 30% lighter in weight. It can easily accommodate a wide range of platforms, including multi-rotor VTOL fixed-wing aircraft, small multirotors, helicopters, UGVs, and USVs.

Equipped with H7 High-Performance Processor

Despite the significant reduction in size and weight, the UniFC 6 PICO is equipped with an STM32H7 processor, paired with 2M flash and 1M RAM, delivering powerful data computing and processing capabilities and leaving broader room for future development. It also upgrades to ICM45686 + BMI088 dual IMU redundancy, offering a larger measurement range and greater noise immunity, making it suitable for aggressive flight scenarios with small aircraft.

Dual IMU & Barometer Redundancy

Redundancy is the lifeline of an industrial-grade flight controller. The UniFC 6 PICO pushes size to the limit while maintaining redundancy. Its compact 40g body integrates dual IMU + dual barometer redundancy with failover support, ensuring system accuracy and stability. If any sensor experiences a temporary failure, the redundant sensor ensures the system continues to operate stably, effectively reducing the risk of a crash. At the same time, compared with products in the same class, its sensors offer a larger measurement range and greater noise immunity.

Low external temperatures can also affect the precision of sensor data output. On top of dual IMU redundancy, the UniFC 6 PICO features a built-in IMU temperature compensation system. Through algorithm optimization, it can adjust flexibly according to the external ambient temperature, heating the IMU to keep it at a constant temperature (default 45°C), effectively reducing sensor "temperature drift."

Supports 3.3V / 5V PWM Output Switching

To accommodate the different requirements of multirotor and VTOL platforms, the UniFC 6 PICO supports flexible switching between 3.3V and 5V PWM output, selectable as needed. For example, in multirotor integration, 3.3V PWM can be selected, while in fixed-wing/VTOL integration, switching to 5V PWM helps reduce signal attenuation caused by line loss and interference.

Rich Interface Expansion

Interfaces are one of the key prerequisites for flight controller selection. The UniFC 6 PICO integrates a diverse and rich set of interfaces to ensure compatibility with most mainstream use scenarios, including: 5× UART, 3× I2C, 2× CAN, 14× PWM output, 1× RC IN (SBUS/PPM), 1× PM power module input, 1× USB port (Type-C), 1× TF card slot, and 1× Ethernet port.

100M Ethernet Interface, Extensive Expandability

In addition to standard functional interfaces, the UniFC 6 PICO features an additional 100M Ethernet port, supporting connections to multi-function mission gimbals, onboard computers, and other extensive expansions, enabling advanced capabilities such as unmanned system swarming, AI tracking and recognition, mapping, and others.

Multi-Model Compatibility, More Than Just UAVs

Deeply integrated with Ardupilot and PX4 open-source firmware, the UniFC 6 PICO supports multiple model options, including but not limited to multirotor / fixed-wing / VTOL / FPV model aircraft / helicopter / UGV / USV, among others. With comprehensive functionality and rich expandability, it enables the construction of diversified unmanned systems.

Complete Flight Controller Kit, Factory-Direct Product-Level Solution

The UniFC 6 PICO supports a series of SIYI flight controller ecosystem products, covering a variety of GNSS modules, RTK positioning and heading modules, Hall-effect power modules, airspeed sensors, and more. Complete flight controller kit, ready to use out of the box. All products simultaneously support the Ardupilot / PX4 open-source ecosystem, shipped directly from the manufacturer, available through one-stop purchasing, significantly lowering the barrier to use.

Meet SIYI Ecosystem Expansion

Gimbal Camera - Link & Controller - Autopilot - Propulsion System - Software, Five-in-one integration. UniFC 6 PICO is deeply integrated into the SIYI ecosystem, enabling quickly connect to various components, greatly reducing adaptation costs. Paired with UniGCS software, one-stop parameter tuning and control. More expansion possibilities, beyond traditional open-source ecosystem!