VTOL UAV Poppy Field Inspection | SIYI × MINGDE
The MINGDE G25 is a 2.5 m-wingspan VTOL fixed-wing UAV. SIYI supplies the complete onboard ecosystem behind it — data link, compact four-sensor AI gimbal pod, ground control software and an AI training platform — and, working around the strengths of the G25 platform, helps MINGDE quickly put together an anti-drug field reconnaissance solution built on high-speed area sweep, model-based plant recognition and coordinate-stamped records.

1. Manual Sweeps: Blind Spots, Long Hours, Hard to Tell Apart
No. | Field Challenge | What It Requires |
1 | Short operational window | Poppy cultivation clusters into March–May, with a short flowering window and scattered plots. A wide-area aerial sweep is what makes full use of it. |
2 | Buildings in the way | Poppies are usually intercropped in courtyards, under trees and along field ridges, in small plots tight against homes. Sending people in to check meets resistance and exposes them; an overhead view with long-range zoom confirms the plot without alerting anyone. |
3 | Look-alikes slow recognition | Poppies resemble rapeseed and corn poppy closely, so human reading of the imagery misses and misreads; a trainable detection model is what turns seeing into recognising. |
2. A Model You Train Yourself
The solution uses the MINGDE G25 as its flight platform. A UniRC 10 Pro tri-band redundant handheld ground station builds a 45km air-to-ground command-and-video link; the UniPod MT11 compact four-sensor AI pod carries 48MP visible light, 165× zoom and infrared for both sweeping and identification; UniGCS takes on one-tap take-off, intelligent routes and tuning for every component; and UniAI Studio supports no-code training of a poppy-detection model with private deployment. Link, pod, software and model sit on the same mission chain, so what reaches the field team is a combination that works as a complete aircraft.

Figure 1 | Product-level solution: the MINGDE G25 airframe with SIYI's onboard ecosystem — UniRC 10 Pro, UniPod MT11, UniGCS and UniAI Studio
3. One Flight to Find the Source
The solution breaks a single reconnaissance mission into three airborne steps plus one ground loop:
① High-speed patrol: the VTOL design needs no runway, so a target village can be covered in one pass instead of being walked lane by lane.
② Screen and lock the plants: once a suspicious plot appears, switch to 165× zoom and step in; 8× infrared helps separate plot features, and 10 TOPS of on-board compute runs the custom model, flagging suspects directly on the image.
③ Record the coordinates: confirmed targets are photographed and their coordinates logged, so image and position stay tied to the same frame.
④ Report and act: imagery and coordinates stream back over the UniRC 10 Pro 45km link to the command display, where a team reviews together and dispatches a check on the spot.
_da3e2958.webp)
Figure 2 | Project-level solution: a four-stage chain — take-off and patrol, cultivation screening, photo records, ground command post
4. Skip the Long Integration, Focus on the Mission
Product Type | Selection | What It Delivers on Site |
Link & Controller | · Tri-band redundant video link at 45km — fewer transits between mountain villages, a wider working radius | |
Gimbal Camera | · Compact four-sensor AI pod — visible light, zoom, infrared and laser ranging in one payload, sweeping and identifying without a swap | |
Software | · One-tap take-off and intelligent routes | |
Software | · No-code training of a task-specific AI model, built around local plant forms and plot features |
5. Where Boots Cannot Go, the Aircraft Sees for You
Built on SIYI's complete onboard ecosystem, the MINGDE G25 VTOL UAV moves anti-drug reconnaissance from “people walking the hills” to “aircraft sweeping the area” — day-night vision, AI recognition, 45km stand-off data return and automatic coordinate records, so a lead moves from spotted to verified in one step.